Applications: Direct installation into engine oil gallery, transmission housing and fuel system for lubricant and fuel quality monitoring

　　Industries: Aerospace and Military, Engine and Vehicle, General 

　　Description: The FPS2800B12C4 is a novel fluid property sensor that will directly and simultaneously measure the viscosity, density, dielectric constant and temperature of fluids. Relying on patented tuning fork technology, the sensor monitors the direct and dynamic relationship between multiple physical properties to determine the quality, condition and contaminant loading of fluids such as engine oil, fuel, transmission and brake fluid, hydraulic and gear oils, refrigerants and solvents. The multi-parametric analysis capability improves fluid characterization algorithms. The FPS provides in-line monitoring of fluids for a wide range of OEM and aftermarket installations including fluid reservoirs, process lines and pressurized high flow conduits (e.g., engine oil gallery) for applications that include on and off highway vehicles, HVAC&R, compressors, industrial equipment and turbines. A universal digital CAN J1939 compliant protocol provides easy to connect interface to main Host controller. A simple 4 pin connector allows for cost effective mounting options.

　　Features:

　　Fully integrated, stand-alone module combines sensor and processing electronics

　　Rugged construction for high pressure and high flow environments

　　Proprietary corrosion and contaminant resistant coating for wetted parts

　　Accurate, repeatable temperature, viscosity, density and dielectric constant

　　Factory calibrated with NIST traceable fluids

　　On-board microprocessor for real-time data analysis with 12 or 24 Volts supply

　　Highly reliable and long term stability

　　Digital output as per J1939, CAN2.0B standard or CAN 2.0A featuring high-　　resolution parameter readings

　　典型應用: 直接安裝在發動機油路，變速器和燃油系統，用于監控潤滑油和燃油品質

　　行業: 航天國防, 發動機和機動車輛, 工業控制

　　產品描述:

　　FPS2800B12C4是一款新穎的液體特性傳感器，可以同時直接測量液體的粘度，密度，介電常數和溫度。基于MEAS音叉原理技術，該傳感器通過監控液體各個物理特性之間的直接動態關系，實現對一系列液體的品質，狀況和污染的測量，包括對發動機油，燃油，變速箱油，剎車油，液壓油，齒輪箱油，制冷劑，以及溶劑的監測。產品的多參數測量功能改善了液體特性的分析方法。FPS液體特性傳感器廣泛的應用于儲液罐，高壓高流量管道（例如，發動機油路）等OEM和后裝市場，包括道路機車，工程機械，HVAC&R，壓縮機，工業設備和汽輪機等。 通用的CAN J1939 協議方便與主控制器的通訊，簡單的4針接頭降低用戶的安裝成本。

　　特點:

　　功能齊全，獨立模塊，集成電路處理的復合型傳感器

　　結構堅固，可應用于高壓和高流量環境

　　抗腐蝕和防污染涂層

　　精確的，可重復的溫度，粘度，密度和介電常數測量

　　工廠校正，NIST標準

　　12V或24V供電，內置微處理器提供實時數據分析

　　可靠性高，長期穩定性好

　　數字輸出，分辨率高（符合J1939，CAN2.0B標準，或CAN2.0A）

　　
　　FPS2800B12C4傳感器更多技術參數及規格書下載請瀏覽：http://tcmtest.cn/sensors/192.html

　　北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。