產品中心 應用方案 技術文摘質量保證產品選型 下載中心業內動態 選型幫助 品牌介紹 產品一覽 聯系我們
- MS5803-30BA微型壓力傳感器中英文產品介紹
- 來源:賽斯維傳感器網 發表于 2014/10/16
Applications: Mobile water depth measurement systems, Diving computers, Adventure or multi-mode watches
Description: The MS5803-30BA is a new generation of high resolution pressure sensors with SPI and I2C bus interface. It is optimized for depth measurement systems with a water depth resolution of 2.5cm and below. The sensor module includes a high linear pressure sensor and an ultra low power 24 bit ΔΣ ADC with internal factory calibrated coefficients. It provides a precise digital 24 Bit pressure and temperature value and different operation modes that allow the user to optimize for conversion speed and current consumption. A high resolution temperature output allows the implementation of a depth measurement systems and thermometer function without any additional sensor. The MS5803-30BA can be interfaced to any microcontroller. The communication protocol is simple, without the need to programming internal registers in the device. The gel protection and antimagnetic stainless steel cap make the module waterproof. This new sensor module generation is based on leading MEMS technology and latest benefits from MEAS Switzerland's proven experience and know-how in high volume manufacturing of pressure modules have been widely used for over a decade. This sensing principle employed leads to very low hysteresis and high stability of both pressure and temperature signal.
Features:
• High resolution module, 0.5 mbar
• Fast conversion down to 1 ms
• Low power, 1 μA (standby < 0.15 μA)
• Integrated digital pressure sensor (24 bit Σ ADC)
• Supply voltage 1.8 to 3.6 V
• Operating range: 0 to 30 bar, -40 to +85 °C
• I²C and SPI (Mode 0, 3)
• No external components (Internal oscillator)
• Excellent long term stability
• Hermetically sealable for outdoor devices
典型應用: 手持式水深測量系統,潛水設備,運動手表
產品描述:
MS5803-30BA是MEAS瑞士分公司新一代的高分辨率(2.5cm水深)壓力傳感器,帶有SPI和I2C兩種接口,是水深測量的理想選擇。傳感器包括高線性度的壓力傳感元件和超級低功耗的24位ΔΣ ADC,內置工廠校準系數。MS5803-30BA提供高精度的24位壓力和溫度數字輸出,客戶可以根據應用需要配置轉換速度和功耗。高分辨率的溫度輸出可以同時實現溫度計的功能。MS5803-30BA可以與所有形式的微控器配合,通訊協議非常簡單,無需修改內部寄存器。防水膠和防磁不銹鋼圈確保傳感器的防水功能。這款新傳感器模塊基于先進的MEMS技術,并受益于MEAS過去十幾年來在研發和批量生產氣壓/高度計方面的經驗。先進的傳感技術成就了低磁滯,高穩定性的壓力/溫度傳感器。
特點:
高分辨率:0.5 mbar
轉換速度快:1 ms
低功耗:1 μA(待機功耗 < 0.15 μA)
集成的數字式壓力傳感器(24位ΔΣ ADC)
供電電壓:1.8 ~ 3.6 V
量程:0 ~ 30 bar,-40℃ ~ +85℃
I²C和SPI接口(模式0,3)
無需外部元件(內置振蕩器)
優異的長期穩定性
完全密封,適合戶外裝置
轉載請注明來源:賽斯維傳感器網(tcmtest.cn)
- 如果本文收錄的圖片文字侵犯了您的權益,請及時與我們聯系,我們將在24內核實刪除,謝謝!