Applications: Mobile water depth measurement systems, Diving computers and diving watches

　　Description: The MS5535-30C is a high-pressure version of MS5535C pressure sensor module. It contains a precision piezoresistive pressure sensor and an ADC-Interface IC. It uses an antimagnetic polished stainless ring for sealing O-ring. It provides a 16 Bit data word from a pressure and temperature dependent voltage. Additionally the module contains 6 readable coefficients for a highly accurate software calibration of the sensor. MS5535- 30C is a low power, low voltage device with automatic power down (ON/OFF) switching. A 3-wire interface is used for all communications with a microcontroller.

　　Features:

　　•Resolution 3.0 mBar
　　•Supply voltage 2.2V to 3.6V
　　•Low supply current < 5uA
　　•Standy current < 0.1µA
　　•-40°C to +125°C operation temperature
　　•16 Bit ADC resolution pressure measurement and control systems

　　典型應用: 手持水深測量系統，潛水設備和潛水表

　　產品描述:

　　 MS5535-30C是高壓版本的MS5535C，由高精度的硅壓阻傳感元件和模數轉換IC組成。防磁拋光金屬環與O型圈配合用于密封。傳感器提供16位的壓力和溫度數字輸出，同時還提供6個可讀系數用于高精度的軟件校正。MS5535-30C的主要特點是低電壓、低功耗，以及自動待機（ON/OFF）功能，通過3線接口和外部微控器通訊。

　　特點:

　　分辨率：3.0 mBar
　　供電電壓：2.2V ~ 3.6V
　　低功耗：< 5uA
　　待機功耗：< 0.1µA
　　工作溫度：-40°C ~ +125°C
　　16位ADC分辨率

　　轉載請注明來源：賽斯維傳感器網（tcmtest.cn）