Applications: Vibration & Shock Monitoring, Laboratory Testing, Modal Applications, High Frequency Applications, General Purpose Usage

　　Description: The Model 7130A is a triaxial IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features three independent welded stainless steel assemblies incorporated into a hard anodized aluminum housing. The model 7130A incorporates a stable piezo-ceramic crystal in annular shear mode, installed with a compression ring that eliminates the usage of epoxies that can affect long term stability. The accelerometer has an operating range of -55°C to +125°C and a flat frequency response to 9kHz.

　　Features:

　　Triaxial IEPE Accelerometer

　　±50g to ±500g Dynamic Range

　　Hermetically Sealed

　　Wide Bandwidth to >9kHz

　　-55° to +125°C Operating Range

　　Isolated Aluminum Housing

　　Annular Shear Mode Crystals

　　Stable Temperature Response

　　典型應用: 振動和沖擊監測，實驗室測試，模態應用，高頻應用，一般應用

　　產品描述:

　　7130A是一款三軸IEPE加速度傳感器，動態量程從±50g到±500g。傳感器采用三個獨立的全密封不銹鋼結構，封裝于堅固的陽極氧化鋁外殼。通過壓縮環安裝環形剪切壓電陶瓷晶體，從而消除了使用環氧膠安裝對長期穩定性的影響。傳感器的頻率響應可達9kHz，工作溫度范圍從-55℃至125℃。

　　特點:

　　三軸IEPE加速度傳感器

　　帶寬可達9KHz

　　±50g ~ ±500g動態量程

　　全密封

　　工作溫度：-55℃ ~ 125℃

　　絕緣鋁外殼

　　環形剪切壓電陶瓷晶體

　　穩定溫度響應

　　7130A加速度傳感器更多技術參數及規格書下載請瀏覽：http://tcmtest.cn/sensors/697.html

　　北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。