Applications: Asset Monitoring, Data Loggers, Impact Monitoring, Machine Health Monitoring, System Wake-Up Switch, Embedded Applications

　　Industries: Aerospace and Military, Engine and Vehicle, Medical, Consumer Goods, General Industry

　　Description: The Model 832 is a low cost, board mountable triaxial accelerometer. Featuring stable piezo-ceramic crystals, the accelerometer incorporates full power and signal conditioning with a maximum current consumption of 4 micro-amps. The model 832 is available in ±25g to ±500g ranges and provides a flat frequency response up to 2kHz. The model 832M1 provides an extended frequency range to 6kHz.

　　Features:

　　Low Cost Triaxial Piezoelectric Accelerometer
　　<4µA Current Consumption
　　±25g to ±500g Dynamic Range
　　Circuit Board Mountable
　　Hermetically Sealed
　　Full Power and Signal Conditioning
　　-20° to +80°C Operating Range

　　典型應用: 設備監控，數據分析，沖擊測試，系統喚醒開關，嵌入式OEM應用

　　行業: 航天國防, 發動機和機動車輛, 醫療, 消費電子和家用電器, 工業控制

　　產品描述:

　　832是一款低成本的板載式三軸加速度傳感器，采用穩定的壓電陶瓷晶體，經過信號處理，最大功耗為4µA。產品量程為±25g至±500g，響應頻率可達2kHz。同類型的832M1的響應頻率可達6kHz。

　　特點:

　　低成本三軸壓電式加速度傳感器
　　功耗<4µA
　　動態量程：±25g ~ ±500g
　　板載式
　　全密封
　　信號處理
　　工作溫度范圍：-20℃ ~ 80℃

　　832加速度傳感器更多技術參數及規格書下載請瀏覽：http://tcmtest.cn/sensors/536.html

　　北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。